APRS Packet Errors for VK2JFP-5 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260209131441VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.21V
20260209134441VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.23V
20260209141441VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.24V
20260209144441VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.23V
20260209151441VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.23V
20260209164442VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.23V
20260209171442VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.24V
20260209174442VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.24V
20260209181442VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.23V
20260209184442VK2JFP-5>APLRG1,WIDE1-1,qAR,VK2JFP-10:=L^3/-t[&)# !GLoRa APRS Digi Tamworth Batt=4.22V