APRS Packet Errors for VA7SAT-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260209092915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209095915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209102915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209105915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209112915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209115915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209122915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209125915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209132915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209135915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209142915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260209145915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR