APRS Packet Errors for SP1RAC-3 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260209123940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209125940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209131944SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209133940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209135940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209141940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209143940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209145940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209151940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209153940SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209155941SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz
20260209161941SP1RAC-3>APLRG1,WIDE1-1,qAO,SP1RAC-2:=L3)JDRV3[# !GLoRa APRS / 434.855 MHz