APRS Packet Errors for PE1KHX-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260209110106PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209113106PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209120106PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209123107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209130107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209133107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209140107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209143107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209150107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209153107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209160107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz
20260209163107PE1KHX-10>APLRG1,TCPIP*,qAC,T2DENMARK:!L4LZ2OE2,& GLoRa APRS, RX 433.775 MHz