APRS Packet Errors for DL4AX-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260209115538	DL4AX-10>APLRG1,WIDE1-1,Q0386,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209122538	DL4AX-10>APLRG1,WIDE1-1,Q1189,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209125538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209132538	DL4AX-10>APLRG1,WIDE1-1,Q0988,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209135538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209142538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209145538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209152538	DL4AX-10>APLRG1,WIDE1-1,Q1188,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209162538	DL4AX-10>APLRG1,WIDE1-1,Q1188,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209165538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V
20260209172538	DL4AX-10>APLRG1,WIDE1-1,Q1088,qAR,DB0MHS-10:=L4N"%P40J& !GLoRa APRS iGate 433.775 MHz Batt=4.17V